Это пост из рекомендованной группы
Hello gamers
76 просмотров
top of page
Лента новостей групп
Просмотрите группы и посты ниже.
Это пост из рекомендованной группы
HomeKit US Touch Switch not offered anymore?
Hello,
I see the SW03-HK-"n"US-W are no longer available under the HomeKit section.
But they are still available under the ESPHome section.
Can I order the ESPHome versions and flash them with the HomeKit bin firmware files that you have provided me in the past?
I would really like to buy quite a few more of the HomeKit versions to complete the transition of our house.
ta.
556 просмотров
Это пост из рекомендованной группы
What goes in the "M1" area of the 8CH relay PCB?
Hello, I am looking into powering this module from the mains (as the relays will be used on 230V as well).
It looks like the PCB was designed with this in mind, with an unpopulated "M1" area that looks designed to accept another PCB on top.
I assume that this was made for a readily available AC-DC converter? What would be a pin-compatible reference?
The markings say "ZJW-1" and "M1".
Thanks in advance :)
321 просмотр
Это пост из рекомендованной группы
Athom Garage Door Openers - different firmware
I have two of the Athom Garage Door Opener units. One was purchased about a year ago and has what seems like ESPHome firmware, and the other purchased more recently and seems to have HomeKit.
I like the ESPHome firmware better as I seem to get more Control in Home Assistant. For example, I can stop the movement of the garage door mid-stream with the ESPHome Device, but cannot do so with the HomeKit flashed device.
Would it be possible for me to flash the HomeKit device with the ESPHome firmware?
519 просмотров
Это пост из рекомендованной группы
PS02C3MZ Back to stock?
I recently tried to “take control” of my new PS02C3MZ presence senor in esphome dashboard and now everything is unknown.
How can I return this device to stock? T
436 просмотров
Неизвестный пользователь
31 дек. 2025 г.
The PIR is working and so is the Light Sensor. The presence sensor is not working. I'm using the yaml here: https://github.com/athom-tech/esp32-configs/blob/main/athom-ld2450-sensor.yaml. Is the pinout wrong? That's the only thing I can think of that would cause the presence sensor to just stop working while the other sensors work
Это пост из рекомендованной группы
PS02C3 Not detecting occupancy or PIR
My new presence sensor does not detect occupancy or PIR. The mmWave and LUX sensors does detect, but the other 2 sensors do not. I tried to send a message, but have not heard back and did not get a confirmation email.
717 просмотров
Неизвестный пользователь
17 дек. 2025 г.
Hello! This website is designed for people who are open to new connections, whether that means friendship or something deeper. Personally, I met someone who later became an important part of my life. After that experience, I often Visit Website to see how others are doing. It can really help people who want meaningful connections instead of superficial chats.
Это пост из рекомендованной группы
Wled Moon module on Slim controller
Hi i just want to know what i do wrong, c3 moon module firmware just can get installed on the flim controller without failing.
415 просмотров
Неизвестный пользователь
11 янв.
I was just leaning against a wall at a train station in the UK today while checking my phone. I saw the words Plaza Royal Casino on the screen and stood there for a minute just watching the people go by. The display was a bit bright for the morning but I didn't bother changing it. I just held the device in my hand until the announcement for my platform finally came over the speakers.
Изменено
Это пост из рекомендованной группы
LS-4P update to 0.15.0 bricked device?
I've performed a manual upgrade to WLED 0.15.0 on my LS-4P via the web interface and it seems to have gotten bricked.
There is no WLED access point, and it is not connecting to the configured wifi, popping the cover off and powering the device on and off also doesn't show any signs of life.
Is 0.15.0 not supported?
Is there a way to reset / recover the bricked device?
311 просмотров
Неизвестный пользователь
19 янв.
Stumbled upon this after it was shared in a Redditch gaming forum during a late-night scroll. What made me stay was a reasonable discussion about Xtraspin Casino paired with honest observations on jackpot ticker updates and prize pool refresh rates for UK players. No flashy claims about real-time precision or instant accuracy. The straightforward tone was a breath of fresh air. When I finished, I felt at ease, like I'd found actual community feedback.
Это пост из рекомендованной группы
RGBCW - how to avoid overheating
I see in https://www.athom.tech/blank-1/wled-gu10-rgbcw your comment:
"Open sources firmware has no control of power supply , if you maximum all channel at the same time, it will highly possible damage the bulb and we will not provide warranty in such case"
Do you have any advise on what I can reliably set the different channels to in each lamp to have run continuously without overheating? I want to output warm white light continuously - can I set each channel to 80%? Can you recommend a configuration that will give continuous warm light output?
I have purchased four of these globes to trial, and am considering replacing all globes in the house.
I have a custom home control system and use a MQTT broker on a Raspberry Pi, with tasmota wall switches publishing to an MQTT topic to turn on a set of lights that subscribe to that topic. Before installing…
209 просмотров
jm
01 окт. 2025 г.
Thanks, Athom_Support. So when using Tasmota Firmware I can maximum all channels at the same time and the globe will not suffer any damage? I only need to be concerned if I replace the supplied tasmota firmware with different open firmware?
bottom of page
Hey guys, quick question regarding the UI layout on this platform. I’ve been trying to access the jenna foxx joi online section from my tablet, but the sidebar seems to overlap with the main interaction window. On desktop, it looks absolutely stunning and works perfectly the AI responsiveness is actually some of the best I've seen lately. But if anyone has a fix for the mobile view scaling, let me know. Aside from that small glitch, the site is definitely a top-tier experience for anyone looking for high-quality interactive modules.