• Home

  • Products

    • Local Shipping
    • Tasmota
    • ESPHome
    • WLED
    • Homekit
    • Home Bridge
  • Forum

  • About Shipping

  • Contact Us

  • 更多

    Use tab to navigate through the menu items.
    0
    Чтобы увидеть, как это работает, перейдите на опубликованный сайт.
    • Разделы
    • Все посты
    • Мои посты
    eslam fikry
    07 апр. 2021 г.

    Smart switch restarting by itself

    в Wall Switch

    I have issue with Athom smart switch 2 gang it's restarting by itself after 1 or 2 min and turn off the light

    and no response in apple homekit


    11 комментариев
    0
    11 комментариев

    Поделитесь своим мнениемЗарегистрируйтесь, чтобы оставить комментарий.

    G
    Goran Skular
    Goran Skular
    21 янв.

    UPDATE: my problem with restarting is solved. More info here https://www.athom.tech/forum/esphome-related-1/esphome-switches-restarting-led1-gpio14-problem


    I do have a Problem 2 with led1 still on ESPHome...

    Лайк

    G
    Goran Skular
    Goran Skular
    21 янв.

    I tried with a new ESPHome firmware, couple devices... and eventually also with Tasmota firmware. In a 'no neutral' configuration it just restarts when relay is turned on. Disclaimer: maybe it works 'with neutral' configuration, but I can't use it that way.


    It can be that it's a hardware related problem.


    More in detail on ESPHome forum: https://www.athom.tech/forum/esphome-related-1/esphome-switches-restarting-led1-gpio14-problem


    Ahhh.. and what to do now?


    Лайк

    G
    Goran Skular
    Goran Skular
    21 янв.

    I just bought 48 wall switches, EURO version.. and have the same problem. I updated esphome to 2022.1.1 and still the device restarts all the time. I use no-neutral connection.

    Лайк

    gonzalo_dd
    06 июн. 2021 г.

    can someone from the company contact me? My email es gonzalo_dd (at) hotmail (dot) com

    Лайк

    gonzalo_dd
    02 июн. 2021 г.

    I see… is it too complex to update via serial port?

    Лайк
    Athom_Support
    02 июн. 2021 г.
    Ответ пользователю

    Need welding

    Лайк

    G
    G D
    G D
    12 авг.
    Ответ пользователю

    No problem welding. I understand that if something goes wrong it will be my fault, but anyways in the current state with firmware version 0.2 the switch is unusable and non-upgradable. Can you share some instructions about the actual procedure?

    Лайк

    Athom_Support
    02 июн. 2021 г.

    0.2 may not be able to upgrade, the version must be greater than or equal to 0.3 to upgrade, and the version below 0.2 must be burned through the serial port!

    Лайк

    gonzalo_dd
    02 июн. 2021 г.

    model says SW034US, version 0.2. What address should I send email?

    Лайк

    Athom_Support
    02 июн. 2021 г.

    Take a look at the version number of the switch firmware, the latest version is 0.6, if you need to upgrade, you can contact us by email

    Лайк

    gonzalo_dd
    02 июн. 2021 г.

    I have the same issue. Any solutions?

    Лайк
    11 комментариев
    Похожие посты
    • Color led switch
    • Tasmota dimmer switch?
    • ESPHome Switches restarting + LED1 (gpio14) problem - restarting SOLVED

    ©2020 by athom.