Чтобы увидеть, как это работает, перейдите на опубликованный сайт.

Change ieee address on Zigbee Gateway?

I want to migrate from an existing USB zigbee adatper to the Athom gateway without re-pairing all of my devices. According to this article it possible if I copy over the ieee address from my existing adapter to the gateway. Any advice on how I might go about changing the ieee address on the Athom gateway running ESPHome?

3 комментария

Лайк

Comments (3)

Athom_Support

22 февр.

This may require re-flashing the zigbee firmware

https://zigbee.blakadder.com/Athom_ZG01.html

Лайк

PANiCnz

22 февр.

Ответ пользователю

Is it possible to upgrade the zigbee firmware over the network? Or does it need to be a serial connection?

In the web interface there is the option to toggle "Prep the cc2652p2 for firmware update", but when I try to flash the firmware with cc2538-bsl.py I get a timeout message "ERROR: Timeout waiting for ACK/NACK after 'Synch (0x55 0x55)'"

If I can get cc2538-bsl.py working I think I can change the ieee address using the ZigStar Multi Tool.

Лайк

Athom_Support

22 февр.

Ответ пользователю

You need a serial flash tool, more documentation You need to open the shell switch to connect it directly to the zigbee module, the default is to connect it directly to the ESP32

Лайк