Pre Flashed WLED WiFi Smart Bulb
 
Pre configed IOs plug and play
Pre flashed before assembling
Build in ESP8285 chip with 2M flash
 
To reset bulb please follow the instuction of the picture
 
Color: RGB+Warm+Cold White
Color Temperature: 3000-6000K
Brightness: 300 lumens
Voltage: 110V~240V
Power: 4.5W
Base:  GU10
Material: Aluminium+Plastic
Working Temperature: -25°C~65°C
Size: 60x60x115 mm
Wireless: WiFi 802.11/b/g/n
Control Mode: APP/Voice/Manual
Certification: CE, RoHS
 
Notice: If you want to upgrade the firmware, please use "WLED_0.x.x_ESP02.bin.gz"
 
The first rule of upgrading: If it ain't broke, don't fix it!
In other words, ensure that there is a good reason to mess with a working installation (e.g., a need to use a new feature or address a found problem fixed in the current version).
 
Custom version firmware
 
Danger:
Open sources firmware has no control of power supply , if you maximum all channel at the same time, it will highly possible damage the bulb and we will not provide warranty in such case.